YPRO Eye Shield is designed to protect the eyebol of the customer during the laser removal process of permanent makeup. The shield does not heat up, does not conduct the heat, does not absorb and does not reflect laser energy. The product is sold on non-sterile. The product cannot be returned and exchanged.
Composition
Nickel, chrome, molybdenum and silicon
Instructions
For the first and any use, the shield must be sterilized well and put in the sterile bag.
1. With your right hand, remove a sterile shield from the sterile bag using a specially designed holder.
2. Open the upper and lower eyelids with your left hand, without pressing the eyeball of the client.
3. Carefully place the shield under the upper eyelid first. Then place the remaining plate under the lower eyelid. Do not use pressure while inserting the shield.
Remove the eye shield:
1. Hold the specially designed holder with your right hand. Carefully pull the eyelid down from the lower client at the same time.
2. Carefully pull the shield with your right hand out of the lower eyelid and remove it from the eye.
Advice
1. To use one shield for both eyes. It can cause a secondary infection.
2. Keep the shield on the eyeball of the client for longer than 15 minutes.
3. Dish the shield of the customer's eyes.
4. The laser energy focus on the polished surface of the shield.
5. Do not use bleach, chlorine, metal -biting products, abrasive cleaning agents for cleaning and sterilization.
6. The shields must be disinfected, sterilized and authorized in the right way.
7. Make sure you follow the protocol of your local laws and regulations.
